Get Our App, Get 5% OFF!

AI Air Lamp & Power Generator Guide

Instructions So Simple, Even Your Dog Could Do It

How It Works

The Al-air Generator Power Lamp is a new kind of high-energy power source.
It uses three main parts:

  1. A special aluminum metal plate (called a negative multi-component aluminum alloy)

  2. An air plate (called a positive air electrode)

  3. An electrolyte mix (made by using food-safe alkaline water, or just household salt or industrial salt with water)

The lamp comes with two metal plates. When you add the electrolyte mix (salt + water), it starts making electricity.
You don’t need to plug it into the wall or charge it with regular electricity.

When the metal plates are used up, you can take them out and put in new ones so the lamp can keep working.

What's In The Box

When you open the box, you’ll find:

One Al-Air Generator Power Lamp – The main unit that generates power and light.

Two Electrode Plates – Essential for the chemical reaction that generates power.

Four Bags of Electrolyte Powder – Helps activate the power generation process.

One Easy-to-Follow User Manual

If anything is missing or damaged, contact us via WhatsApp!

The Parts

Understanding The Parts

We use numbered icons (1ļøāƒ£, 2ļøāƒ£, 3ļøāƒ£) throughout this guide to help you easily locate and understand each component. These numbers correspond to the parts listed below and will make setup and troubleshooting much simpler.

The Top

2ļøāƒ£ LED Switch – Turns the light on and off.

7ļøāƒ£ Gas Vent – Allows gas to escape safely.

The Inside

3ļøāƒ£ USB/ Type-C | Serial Port – Used for charging devices.

šŸ”Ÿ Electrode Plates – React with the electrolyte to generate power.

The Outer Parts

1ļøāƒ£ Thread Cap – Liquid filling or draining port.

4ļøāƒ£ Metal Buckles – Locks the components in place.

5ļøāƒ£ Power Box – Houses the electrode plates and electrolyte.

6ļøāƒ£ Pedestal – Provides a stable base for the lamp.

9ļøāƒ£ Strap – For carrying or hanging.

8ļøāƒ£ LED Light – Illuminates your space.

Liquids That Can Be Used to Generate Power

If theĀ electrolyte power runs out, you can use alternative salty liquids to keep yourĀ Balinyala Al-Air Generator Power LampĀ running.

Do not mixĀ electrolyte solution and saltwater in the same generator. If switching between them, clean the power generator and electrode platesĀ thoroughlyĀ before using a different liquid.

In anĀ emergency, if electrolyte powder is unavailable, you can useĀ saltwater, seawater, or any salt-containing liquidĀ as a replacement. However, these alternatives generateĀ less powerĀ than the original electrolyte.

While the generator will still work as aĀ lamp, charging electronic devices will take longer (e.g., aĀ smartphone takes about 4.6 hoursĀ to charge when turned off).

Safety

Safety Precautions for Using the Electrolyte

The electrolyte used in this product is a food-grade, high-efficiency, environmentally friendly, and strongly alkaline substance. Although the electrolyte is non-toxic and harmless to human health, neither the electrolyte nor any of its by-products should be ingested. Please wear gloves when assembling and operating the product to avoid extensive contact of the electrolyte solution with your skin. If contact occurs, due to its alkaline properties, some people may experience mild warmth, itching, slight stinging, or a slippery feeling when rinsing with water. In such cases, rinse thoroughly with plenty of clean water.

⚠   Special notes:

1. If the electrolyte accidentally gets into your eyes, rinse immediately with plenty of clean water and seek medical attention as soon as possible.

2. Please keep this product out of reach of children and pregnant women.

LIQUID OPTIONS

Alternative Liquids for Power

The usage time of the Balinyala Al.Air Generator Power Lamp depends on the concentration of the saltwater. Higher salt concentralion = faster reaction = shorter usage time. You can use household salt or industrial salt with a concentration betwcen 1% and 10%. Seawater (3.5% salt) works, but it has lower power output. Adding extra sat improves performance, Aternaive sources like salt-containingsports drinks or condiments (e.g., soy sauce) can work as long as they meet the salt concentration requirement

1

Household or Industrial Salt

Mix with water (1%-10% concentration) for best performance.

2

Seawater

Naturally containsĀ 3.5% salt, but power output is lower. Add extra salt for better results.

3

Salt-Containing Sports Drinks

Some contain enough salt to work as a replacement.

4

Condiments like Soy Sauce

Can be used if salt concentration meets the required range.

5

Sodas (Carbonated Drinks)

Contain small amounts of salt, butĀ high sugar content can reduce efficiency over time. When mixed with salt to make a salt concentration between 1% and 10%, it can also produce electricity.

6

River, Pond, or Lake Water

Contain dissolved minerals and some salt but may not last long and can cause sediment buildup. When mixed with salt to make a salt concentration between 1% and 10%, it can also produce electricity.

Check Saltwater Fluidity Regularly

Check theĀ fluidity of the saltwater every 3-6 hours, depending on power usage.

āŒ If the liquid becomesĀ thick or less fluid, it can reduce performance.

āœ… ToĀ keep performance optimal, clean and replace the saltwaterĀ immediatelyĀ if needed.

When using this generator as aĀ 3W LED lamp, replace the saltwaterĀ every 6-7 hoursĀ to preventĀ solidified sedimentĀ inside the electrolytic cell.

When using this generator with a 9W device (like a mobile phone, walkie-talkie, satellite phone, or camera), you should replace the saltwater about every 3 hours to stop solid stuff from building up inside.

Does Higher Salt Concentration Improve Performance? – No significant advantage—excessive salt is justĀ wasted. Extremely high concentrations canĀ reduce efficiencyĀ and may even prevent the generator from working.

Step By Step Guide

Getting Started

Make sure you have everything listed in theĀ ā€œWhat’s in the Boxā€Ā section.

Unlock the 4ļøāƒ£Ā Metal Buckles and lift the top. Check that the šŸ”ŸĀ Electrode PlatesĀ are properly attached.

Mix the Solution

PourĀ two full bagsĀ of electrolyte powder intoĀ 320ml total volume (electrolyte + water)Ā and stir well.

āš ļøĀ Using less electrolyte powder or too much water will result in low power generation.

Fill the Lamp

Twist open the 1ļøāƒ£Ā Thread CapĀ and pour inĀ 200ml of solution.

Wait a few minutes for bubbling to settle, then pour the remaining solution.

FillĀ just enough to submerge the šŸ”ŸĀ Electrode Plates, then close the cap.

āš ļøĀ Do not overfill – excess liquid may cause overflow or power loss.

Turn It On

Press theĀ ā· LED Switch – your lamp should light up! šŸ’”

Charge Your Devices – Connect your USB, Type-C, or Serial InterfaceĀ to charge your phone or any USB-powered device.

Important Warnings

Proper Solution Filling → Only add enough solution to submerge the šŸ”ŸĀ Electrode Plates.

Even Compartments → Keep solution levels balanced in both sections to ensure stable power.

No Cross-Contamination → Mixing compartments may causeĀ short circuits, heat buildup, rapid bubbling, or electrolyte overflow.

Observe Bubbling → It’s normal for mild bubbling when adding electrolyte. The top cover hasĀ small ventilation holesĀ for this.

Water Level Check → If the šŸ”ŸĀ Electrode PlatesĀ are no longer submerged, addĀ just enoughĀ liquid to cover them.

Charging Phones

The charging speed depends on whether you are using the electrolyte versionĀ or theĀ saltwater versionĀ of the generator.

Electrolyte Version (20W, Max 4A) → Fast Charging ⚔

Charges aĀ 4000mAh phoneĀ inĀ 1.5 to 3 hours.

Saltwater Version (9W, Max 1.6A) → Slower ChargingĀ ā³

TakesĀ about 4.6 hoursĀ to fully charge a phone.

If the phone isĀ turned off, charging will be slightly faster.

Important Tips

Tips During Use

Our design is based on anĀ 8-hour continuous usage plan

Usage More Than 8 Hours

If you need to use the generator forĀ more than 8 hours, you have two options:

Check the liquid level → Ensure the solutionĀ fully submerges the Electrode Plates. If the level is low, add a small amount of water.

Dissipate heat → If water is unavailable, open theĀ top threaded capĀ to help prevent overheating and maintain stable performance.

Check Electrolyte Fluidity Regularly

If using the generator for extended periods, ensure that theĀ electrolyte solution remains fluid.

A decrease in fluidity may reduce performance and cause inefficiencies.

Always monitor the liquid andĀ add a small amount of water if neededĀ to maintain optimal operation.

Check Electrolyte Solution Fluidity Regularly

TheĀ fluidity of electrolyte solution should be checked every 4-6 hours, depending on power consumption.

āŒ If the liquid becomesĀ thick or less fluid, it canĀ affect performance.

āœ… To ensureĀ optimal operation, clean and replace the electrolyte solution immediately if needed.

Replacing the Electrode Plates

Replace the electrode plate once it’s fully used.

Each new plate provides long-lasting power. Its lifespan depends on how often you use the AI Power Lamp and the type of devices you charge.

With light or occasional use, a single plate can last a very long time.

Storage, Cleaning & Maintenance

Stopping Use for More Than 2 Hours

If you won’t be using the lamp for more than 2 hours, pour out the electrolyte or saltwater to completely stop the electrochemical reaction—this prevents unnecessary power loss and extends the lamp’s lifespan. Any unused electrolyte can be reused later; just store it in a clean, sealed plastic bottle or bag.

Long-Term Storage

Empty the electrolyte solution or saltwater. Clean theĀ generator compartment and Electrode Plates. Keep all partsĀ dryĀ to prevent damage and ensure the lamp stays in good condition for future use.

User Manual Giving You a Headache? Let’s Fix That!

Chat with us on Whatsapp